It is in modular form with two portals. One portal is the KRE car wash and the other is the drying unit. The under chassis wash system is mounted on the wash pad. This is a multi programme system.
The three modules of the system can be installed as different units or incorporated as a system.
We have supplied more than 100 car wash systems to dealers of one of India's largest car manufacturer's alone.
|Brand||K R Equipments|
|Motor Power||6.7 kw|
|Pressure Capacity||4 Bar|
|Brand||K R Equipments|
|Motor Power||7.8 Kw|
|Pressure Capacity||5 Bar|
The KRE 002 is an Automatic Brushless Washing system for washing car’s engines and bodies. A car along with engine can be washed in about 2 ½ (2 minutes for a car + ½ minute for engine wash) minutes. It is easily maintainable and highly reliable. It is economical as compared to the manual washing. The Equipment is fully covered by guarantee and comprehensive service schemes like all other KRE range of Automatic Washing Systems.
The system (KRE – 002) has been specially designed to clean the engines of cars and also the entire car with high pressure water alone after covering the car with flakes of soap automatically.
The system consists of:
The KRE-002 system is a self propelled gantry type of machine. The car is driven into the wash bay stopping in front of machine at designated place. The engine is stopped and hand brake firmly applied.
The engine hood is opened to enable engine cleaning. Select chemical spray option with selector switch. Spray the chemical wherever required in engine compartment. Switch off the chemical spray option with selector switch.
Select auto and press start push button to start the oscillating blaster to clean the engine. After a preset time the system shuts off automatically.
Thereafter the machine has two cycles. In the first cycle the gantry moves on rails from one end of the vehicle to the other end spraying the vehicle with special chemical solution mixed with water, covering the whole vehicle surface to loosen the mud attached to it. After a delay the gantry starts the reverse cycle spraying water and rinsing the vehicle at 5 bar pressure. The force of water impinging is increased by injection of air. In the forward and return traverse the car is cleaned by high pressure water impinging on car surface assisted with air with specially designed nozzles placed at strategic places. The reverse cycle can be delayed (special provision made for this) if cleaning by hand is required.The time taken for cleaning a car (one cycle) will be 2 minutes and time taken for cleaning the engine is 1/2 minute usually.
· Option: Machine with waxing operation can also be given if coupled with a drying unit.
· If the vehicle requires more cleaning the wash cycle can be repeated with / without spraying detergent solution.
|Brand||K R Equipments|
|Motor Power||5.5 kw|
The machine is constructed from quality materials and fully treated for corrosion prevention. It has an arrangement to spray degreasant on the engine surface to loosen grease etc. After a delay it gives a fierce spray of water to clean the engine.
The KRE-001 system is a self propelled gantry type of machine. The vehicle is driven into the wash bay stopping in front of machine. The engine is stopped and hand brake firmly applied.
It has two cycles. In the first cycle the gantry moves on rails from one end of the vehicle to the other end spraying the vehicle with special chemical solution mixed with water, covering the whole vehicle surface to loosen the mud attached to it. After a delay of 1 minute the gantry starts the reverse cycle spraying water and rinsing the vehicle at 5 bar pressure. The force of water impinging is increased by injection of air.
In the event it is felt that the vehicle requires more cleaning the above cycle can be repeated.
The movement of the machine, in length, will be controlled in 3 stages to suit vehicle lengths by means of push button.
The machine has 8 nozzles on each side and 8 nozzles on the top which oscillate covering arch of 45 to 60 degrees.
The time taken for cleaning a large vehicle (one cycle) will be 3 minutes.
|Minimum Order Quantity||1 Piece|
An arch to spray water on the Car while being driven through. It will automatically start as soon as the car passes the optical system provided for Automatic start of/for the prewash arch. The car will be then driven to the Automatic Car Wash Machine.
Brush Wash - A standard KRE Automatic Car Wash Machine which is totally automatic and its working is controlled by PLC.
Option 1 - The car is driven and parked before the machine. The machine is started to give a brush wash with water wash to car to complete the cycle in one minute only.
Option 2 - The car is driven and parked before the machine. The machine is started, the car is first covered with soap flakes in the forward movement and in the reverse traverse it is cleaned with water. In the second pass the machine again automatically start and a brush wash with detergent is given in the forward movement and in the reverse movement the car is sprayed with wax. A normal cycle to clean the car takes 2.40 minutes (5 mtrs long car).
After this the car will be driven through the Drying Arch. In normal condition the dryer gives a two pass drying to the car. However, as decided the dryer will be fixed and car will be driven through at slow speed.